Environmental Engineering Lab (BCV504)

Environmental Engineering Lab

Course Code BCV504 
CIE Marks 50
Teaching Hours/Week (L:T:P: S) 0:0:2:0 
SEE Marks 50
Credits 01 
Exam Hours 2
Examination type (SEE) Practical

Sl.NO Experiments

1 Preparation chemical solutions required for analysis and sampling methodologies

2 Determination of pH, Conductivity, TDS and Turbidity.

3 Determination of Acidity and Alkalinity

4 Determination of Calcium, Magnesium and Total Hardness.

5 Determination of Dissolved Oxygen

6 Determination of BOD.

7 Determination of Chlorides

8 Determination of percentage of % of available chlorine in bleaching powder sample,

Determination of Residual Chlorine and chlorine demand.

9 Determination of Solids in Sewage: i) Total Solids, ii) Suspended Solids, iii) Dissolved Solids,

iv) Volatile Solids, Fixed Solids v) Settleable Solids.

10 Determination of optimum coagulant dosage using Jar test apparatus.

11 Determination Nitrates and Iron by spectrophotometer

Demonstration Experiments ( For CIE )

12 Determination of COD (Demonstration)

13 Air Quality Monitoring (Demonstration)

14 Determination of Sound by Sound level meter at different locations (Demonstration)

Suggested Learning Resources:

 IS codes-3025 series

 Standard method for examination of water and waste water, APHA, 20th edition

 Clair Sawyer and Perry McCarty and Gene Parkin, “Chemistry for Environmental Engineering

and Science”, McGraw-Hill Series in Civil and Environmental Engineering.